To make a photo look like a VHS tape, soften its detail, let the color trail past its edges, add fine horizontal noise, and break up the bottom edge of the frame. In Artfkt, those are four VHS effects: Signal Bandwidth, Chroma Bleed, Tape Noise and Head Switching. The worked recipe applies all four, and you can swap in your own photo in the free browser demo and export a PNG.

The untreated night photo: a Ferris wheel with sharp rainbow lights and lit gondolas against a black sky.
Original — sharp lights and clean black sky.
The same Ferris wheel with the VHS filter: softer detail, color smearing to the right of bright edges, fine noise across the sky and a ragged band along the bottom.
VHS filter — the four-effect recipe in this guide.

Try the VHS filter on your photo. It opens this Ferris wheel with the four effects already set. Choose Open photo to replace it; the effects and their settings stay. The photograph is by FUTC on Unsplash, used under the Unsplash License.

What makes a photo look like VHS

A home-video tape stores less detail than a modern photo, and stores color with even less. Playback adds its own faults on top. Each effect below handles one of those parts, so you can keep the ones your image needs. The crops all show the same lower-left corner of the photo at full resolution: first untreated, then with one effect at a time, then with all four.

Close crop of an untreated gondola, an orange light-strip support and a magenta spoke.
Original detail — crisp edges and clean color.
The same crop with Signal Bandwidth: the gondola and lights are noticeably softer and the color drifts slightly past its outlines.
Signal Bandwidth — softer detail; Luma bandwidth 0.32.
The same crop with Chroma Bleed: brightness detail stays sharp while the colors smear sideways from the lights.
Chroma Bleed — color trails sideways; detail stays sharp.
The same crop with Tape Noise: fine horizontal streaks of colored noise across the dark sky and the gondola.
Tape Noise — fine horizontal grain, strongest in the shadows.
The same crop with Head Switching: the very bottom rows of the image are torn sideways into a ragged band.
Head Switching — a ragged band at the bottom edge only.
The same crop with all four VHS effects: soft, color-smeared and noisy, with the torn band along the bottom.
All four together — the recipe in this guide.
  • Signal Bandwidth softens brightness and color detail separately. Lowering Luma bandwidth gives the soft, slightly smeary resolution of a tape copy.
  • Chroma Bleed smears only the color sideways, which is why VHS reds and magentas seem to spill out of their shapes while the outlines stay put. Trailing color sets how far the smear reaches.
  • Tape Noise adds horizontal grain that sits mostly in dark areas. Its Chroma noise control adds the faint colored speckle you see in dark VHS footage.
  • Head Switching tears the bottom few rows of the frame sideways. That ragged strip at the bottom is one of the quickest ways people recognize a tape image.

Add a VHS filter to your own photo

  1. Open the VHS filter recipe in your browser, then choose Open photo.
  2. Open Active FX. The four VHS effects are listed in order: Signal Bandwidth, Chroma Bleed, Tape Noise and Head Switching.
  3. Judge the softness first. If faces or lettering become hard to read, raise Luma bandwidth in Signal Bandwidth.
  4. Adjust Trailing color in Chroma Bleed. Bright, saturated colors against dark areas show the smear most; muted photos need more.
  5. Set Strength in Tape Noise. Look at the darkest part of your photo, where the noise is most visible.
  6. Keep or remove the bottom band in Head Switching with Bottom band height, then choose Export → PNG.

The recipe uses these values. Anything not listed stays at the effect’s default.

Effect Setting Value
Signal Bandwidth Luma bandwidth 0.32
Signal Bandwidth Vertical color bleed 0.40
Chroma Bleed Trailing color 0.50
Chroma Bleed Color spread 0.028
Chroma Bleed Color offset 0.008
Tape Noise Strength 0.14
Tape Noise Chroma noise 0.18
Head Switching Bottom band height 0.04
Head Switching Horizontal shift 0.07

The values are a starting point for this photograph, not a universal VHS preset. A daylight photo with soft color will look much cleaner with the same settings.

Keep the tape look readable

More damage is not more convincing. The second image below adds the Tracking effect and raises Tape Noise and Trailing color. It reads as a badly worn tape, but the tracking band now cuts straight through the wheel.

The restrained VHS filter on the Ferris wheel, with the whole wheel still readable.
Restrained — every part of the wheel stays readable.
A heavily worn VHS version of the Ferris wheel, with stronger noise and color smear and a wide band of horizontal tearing across the middle.
Worn — Tracking added, Tape Noise 0.32, Trailing color 0.85.

Use the heavier version when the damage is the point, such as a cover for a lo-fi release. For a photo that should still feel like a memory, keep the subject clear of Tracking and limit noise to the shadows. In the editor you can move the Tracking band with Band position, or leave Tracking out.

VHS filter or CRT effect?

A VHS filter changes the recorded picture: softness, color smear, noise and tape faults. A CRT effect changes the screen it is shown on: scanlines, phosphor glow and curved glass. You can use both in one stack. To put a single photograph on an old television screen instead, follow how to add a CRT filter to a photo. CRT vs VHS effects compares both looks on the same artwork, and the CRT collection lists the screen effects.

Export your image, or keep building

Try the VHS filter on your photo and export a PNG in the free browser demo. All VHS effects are available there. Demo exports include a small Artfkt watermark by default; you can switch it off free in Settings → Export Settings. Your photo stays on your device; it is not uploaded.

Artfkt desktop adds saved editable projects, reusable saved looks and the rest of the desktop library, on Mac and Windows. See the configured desktop offer.

Source: Ferris wheel at night by FUTC, from Unsplash under the Unsplash License, cropped to 4:5 and resized to 1080 × 1350 for the examples; the cover uses a 16:10 crop at 1600 × 1000. Every treatment was rendered through the real effects in Chrome with WebGPU on 12 November 2026, at time zero with motion off. Detail crops use the same 600 × 600 region of each render. No extra texture or sharpening was added.